| G-3000 |
FCS G-3000 Composite Tri-Fin Set |
| $29.25 |
Qty: |
|
|
Base:
Depth:
Rake:
Flex:
Surfer Wt: |
4_1/4-in (107mm)
4_3/8-in (111mm)
Moderate
Moderate
Light |
|
 |
|---|
| The G3000 offers the surfer more drive due to a lower amount of flex in the fin. The G3000 is one of our most popular templates and the carbon version is a great option is you want a more direct feel. You will find that your board will feel like it has a bit more power than usual. Give these fins a go if you want your small board to have more drive.
|
|
|
| G-5 |
FCS G-5 Composite Tri-Fin Set |
| $29.25 |
Qty: |
|
|
Base:
Depth:
Rake:
Flex:
Surfer Wt: |
4_1/4-in (109mm)
4_1/2-in (115mm)
Moderate
Moderate
Medium |
|
 |
|---|
| G-5 is the great all round fin. It has a traditional foil and the template is favoured by shapers all around the world. It is geared to suit any board and a broad range of conditions. It is an excellent fin to have in your quiver.
|
|
|
| G-AM |
FCS G-AM Composite Tri-Fin Set |
| $29.25 |
Qty: |
|
|
|
Side |
Center |
|---|
Base:
Depth:
Rake:
Flex:
Surfer Wt: |
4_5/8-in (117mm)
4_3/4-in (120mm)
Extreme
Low
Heavy |
4_1/2-in (114mm)
4_1/2-in (115mm)
|
 |
|---|
| Designed by Al Merrick this is the standard Channel Islands template proven over many years. The large base creates excellent drive and speed and its narrow swept back tip offers quick release off the top. A smaller trailing fin enables tighter radius turns. |
|
|
| G-PR |
FCS G-PR Composite Tri-Fin Set |
| $29.25 |
Qty: |
|
|
|
Side |
Center |
|---|
Base:
Depth:
Rake:
Flex:
Surfer Wt: |
4_1/2-in (114mm)
4_1/2-in (115mm)
Moderate
Low
Medium |
4_1/4-in (108mm)
4_5/8-in (117mm)
|
 |
|---|
| G-PR is a high performance fin designed by Pat Rawson. The full foil offers a flex pattern that is stiff at the base with some flex in the tip. This fin offers lots of drive while still being capable of very tight arcs.
|
|
|
| G-YU |
FCS G-YU Composite Tri-Fin Set |
| $29.25 |
Qty: |
|
|
|
Side |
Center |
|---|
Base:
Depth:
Rake:
Flex:
Surfer Wt: |
4_3/8-in (111mm)
4_5/8-in (117mm)
Extreme
Extreme
Medium |
4_1/4-in (107mm)
4_1/2-in (114mm)
|
 |
|---|
| GYU is designed by Yoshinori Ueda (YU) from Japan. It's an excellent high performance fin for medium sized surfers. A narrow tip gives it excellent release off the top. Also available in Carbon Lite.
|
|
|
| K-21 |
FCS K-2.1 Composite Tri-Fin Set |
| $41.25 |
Qty: |
|
|
|
Side |
Center |
|---|
Base:
Depth:
Rake:
Flex:
Surfer Wt: |
4_13/8-in (110mm)
4_1/2-in (115mm)
Extreme
Low
Medium |
4_1/4-in (107mm)
4_3/8-in (111mm)
|
 |
|---|
| One of the results of Kelly Slater taking 1999 off from major world competitions is the K2 Fin. Kelly has been working on this design to help gain better performance characteristics across all conditions. You will find that this fin will give you drive but also give you a certain amount of looseness in your board. This is an exciting fin.
|
|
|
| MR-X |
FCS MR-X Carbon Lite Twin-Fin Set |
| $63.75 |
Qty: |
|
|
Base:
Depth:
Rake:
Flex:
Surfer Wt: |
5_1/8-in (131mm)
5_1/2-in (142mm)
Moderate
Low
All |
|
 |
|---|
| Designed by surfing legend and 4x world champ, Mark Richards, the MRX is a medium sized twin fin set up of Carbon Lite construction. MR has tweaked this template to get exactly what he was looking for. This fin set has universal appeal and works well in a variety of different surfboards. Firstly, as a thruster set [adding a little GS trailer] you will be totally stoked how fast and loose your board is in small waves. Secondly, if you have a fish try it as a pure twin fin set up, it's awesome fun. |
|
|
| PTF-4 |
Pro Teck 4-in 75A Edge Flex Longboard Side Fins |
| $23.25 |
Qty: |
|
|
Base:
Depth:
Rake:
Flex:
Surfer Wt: |
4-in (102mm)
3_3/4-in (95mm)
Moderate
Extreme
All |
|
 |
|---|
| Pro Teck longboard side fins with 75A flex edge, similar in contruction to XF-45. For FCS fin replacement; FCS-type tabs not shown in photo.) |
|
|
| PTF-7 |
Pro Teck 7-in 75A Edge Flex Longboard Center Fin |
| $34.50 |
Qty: |
|
|
Base:
Depth:
Rake:
Flex:
Surfer Wt: |
7-in (178mm)
8.213 (237mm)
Extreme
Extreme
All |
|
 |
|---|
| Pro Teck longboard fin with 75A flex edge, similar in contruction to XF-45. For FCS fin replacement; FCS-type tabs not shown in photo.) |
|
|
| TC-Whiteline |
FCS TC-Whiteline Composite Tri-Fin Set |
| $41.25 |
Qty: |
|
|
Base:
Depth:
Rake:
Flex:
Surfer Wt: |
4_3/8-in (112mm)
4_3/8-in (111mm)
Upright
Medium
Light to Medium |
|
 |
|---|
| This is Tom's second fin, developed to be used in smaller surf and on a wider variety of boards than the TC redline. While it still offers lots of drive, the small tip will offer a high level of release. It can be used by the light to medium weight range of surfers to give them more power.
|
|
|
| TF-1 |
FCS TF-1 Carbon Lite Twin-Fin Set |
| $63.75 |
Qty: |
|
|
Base:
Depth:
Rake:
Flex:
Surfer Wt: |
4_7/8-in (124mm)
5_1/2-in (139mm)
Upright
Medium
All |
|
 |
|---|
| Excellent for twin fins and twinzer set ups or in conventional boards with a trailing fin. |
|
|
| XF-45 |
Pro Teck 4_1/2-in 75A Edge Flex Tri-Fin Set |
| $34.50 |
Qty: |
|
|
Base:
Depth:
Rake:
Flex:
Surfer Wt: |
4_1/2-in (115mm)
4.312-in (110mm)
Moderate
Extreme
Light to Medium |
|
 |
|---|
| Fins with soft leading and trailing edges that were originally developed to reduce fin cuts and injuries. But surprisingly, during the early development period, surfboards with prototype Pro Teck Fins felt smoother, faster and easier to turn. Pro Teck Fins are also very rigid, creating good drive and projection off bottom turns and cutbacks. The combination of soft trailing edges and rigid fins, help to make surfboards equipped with Pro Teck Fins ride smoother, faster, more forgiving and easier to surf. This allows you to surf better while, reducing fin injuries and adding more fun to the sport of surfing! For FCS-type fin replacement (photo doesn't show FCS-type tabs.).
|
|
|
